What are the installation conditions for the water purifier?

With the development of drinking water purification industry, the popularization of water purifier to thousands of households has become an inevitable trend in the future.

What are the requirements for installing a water purifier?

1. The water purifier should be installed at the nearest water source to facilitate drainage.

2. The installation position of the water purifier should not affect the user's other daily operations.

3. Water purifiers and pipes should be installed in places that are not directly exposed to sunlight.

4. Please install the water purifier in a place with drainage facilities, such as the kitchen and balcony, and avoid installing it near wood floors or valuables.

5. There should be a double-hole power socket near the installation position to facilitate the connection between the power supply and the machine.

6. Water inlet pressure is not less than 0.1mpa; Otherwise, the booster pump should be installed; Should not be higher than 0.4mpa, or equipped with a pressure reducing valve.

7. Inlet temperature of water purifier is 5℃& MDash; 38℃, the ambient temperature is 4℃& MDash; 60 ℃. The installation position should not be too wet.

8. If the water pipe needs to pass through the wall, reserve 5cm in advance.

9. Do not tilt or invert the water purifier when placing it.

10. If the raw water is self-supplied well water, it is recommended to consider the installation location of the prefilter.